Novafast™ 1000 is an epoxy vinyl ester resin which has excellent mechanical properties and corrosion resistance.
Novafast™ 1000 is suitable for use in elevated temperature environments and provides protection against corrosion in a wide range of applications and chemical exposures.
Novafast™ 1000 resin is suitable for use as a protective or structural coating and as laminating resin for fibre reinforced structures. Resin may be applied using hand lay-up, spray-up or filament winding methods.
Novafast™ 1000 is recommended where resistance to wear, impact, and temperature are combined with chemical resistance.
| Catalyst | Application between 1%-3% of total resin weight |
| Curing | Between 20°C and 35°C and humidity between 40% and 80% |
 |
 |
| Download the product brochure |
Download the Safety Data Sheet |
| Storage Measures | Stable for 6 months from the date of manufacture when stored away from direct UV light and at or below 24°C. |
| Packaging | IBC (1000L), 60L and 20L pails. |
| Safety | See Safety Data Sheet. |
Duct work constructed using Novafast™ 1000 resin
| Test | Units | Nominal | Method |
|---|---|---|---|
| Tensile Strength | MPa | 86 | ISO 527-1 |
| Tensile Modulus | GPa | 3.2 | ISO 527-1 |
| Tensile Elongation | % | 5-6% | ISO 527-1 |
| Flexural Strength | MPa | 150 | ISO 178 |
| Flexural Modulus | GPa | 3.4 | ISO 178 |
| Barcol Hardness | 0-100% | 35 | EN-59 |
| Heat Distortion Temperature | ºC | 105 | ISO 75 |
1Testing is based on unreinforced cured and post cured
resin castings, using Novafast 1000™ at 25°C
| Viscosity (cPs) | Relative Density | Styrene Content |
|---|---|---|
| 370 | 1.046 | 45% |
Beyond selecting elegible raw materials, Novafast products pass through high quality control and inspection...
Novafast is an Australian company and totally commited to providing the highest standard of composite products...
Download the brochure and have an overview about our company and products...