Novafast™ 2000 is an epoxy resin which has excellent mechanical properties and corrosion resistance.
Novafast™ 2000 is suitable for use in elevated temperature environments and provides protection against damage in a wide range of applications and chemical exposures.
Novafast™ 2000 resin is suitable for use as a protective or structural coating and as laminating resin for fibre reinforced structures. Resin may be applied using hand lay-up, spray-up or filament winding methods.
Novafast™ 2000 can be formulated with a wide variety of curing agents. A wide variety of properties can be achieved, please contact Novafast if you require assistance selecting a resin for your application.
| M1 Series - Part B | ||
|---|---|---|
| Mix Ratio | 4 Resin : 1 Part B | Stoichiometric |
| Gel Time | 130 -190 Minutes (100gms at 23°C) |
ASTM D2471 |
 |
 |
| Download the product brochure |
Download the Safety Data Sheet |
| Storage Measures | Stable for 6 months from the date of manufacture when stored away from direct UV light and at or below 24°C. |
| Packaging | IBC (2000L), 60L and 20L pails. |
| Safety | See Safety Data Sheet. |
Pipe constructed using Novafast™ 2000 resin
| Test | Units | Nominal | Method |
|---|---|---|---|
| Tensile Strength | MPa | 80 | ISO 527-1 |
| Tensile Elongation | % | 3-4% | ISO 527-1 |
| Flexural Strength | MPa | 121 | ISO 178 |
| Flexural Modulus | GPa | 2.9 | ISO 178 |
| Impact Strength | J/m | 45 | ISO 180 |
| Glass transition Temperature | ºC | 130 | ISO 11357 |
1Testing is based on unreinforced cured and post cured
resin castings, using Novafast 2000™ at 23°C
| Viscosity (cPs) | Relative Density | Epoxide Equivalent |
|---|---|---|
| 11,000 | 1.160 | 185 |
Beyond selecting elegible raw materials, Novafast products pass through high quality control and inspection...
Novafast is an Australian company and totally commited to providing the highest standard of composite products...
Download the brochure and have an overview about our company and products...