NovaFlo™ UV Prime Coat is a high-build, high-solids surface tolerant epoxy coating. Available with different hardeners for varying substrate temperatures, Standard (Std) and Fast Cure (FC).
| Colour: | According to color card and Multicolor tinting system (MCI) |
| Solids (vol%) | 83± 2 |
| Flash Point: | 29ºC |
| Gloss: | Semi-Glossy |
| Gloss Retention: | Poor |
| Water Resistance: | Excellent |
| Abrasion Resistance: | Good |
| Chemical Resistance: | Good |
| Flexibility: | Good |
 |
 |
| Download the product brochure |
Download the Safety Data Sheet |
All surfaces should be clean, dry and free from contamination. The surface should be assessed and treated in accordance with ISO 8504.
Bare steel:
Cleanliness: Blast-cleaning to Sa 2½ (ISO-8501-1:2007). Power tool cleaning to min. St 2 (ISO 8501-1:2007) may be acceptable, subject to exposure conditions.
Coated surfaces:
If applied on top of old coating systems the surface must be clean and dry.
Other surfaces:
For aluminium and galvanized surface; degreasing, light abrading or sand sweeping. Please contact Novafast for more information.
Spray: Use airless sray
Brush: Recommended for stripe coating and small areas, care must be taken to achieve the specified dry film thickness.
Roller May be used. However when using roller application care must be taken to apply sufficient material in order to achieve the specified dry film thickness.
Beyond selecting elegible raw materials, Novafast products pass through high quality control and inspection...
Novafast is an Australian company and totally commited to providing the highest standard of composite products...
Download the brochure and have an overview about our company and products...